Single Bucket Excavator

Apr 2, 2014

Single bucket excavator use a single bucket digging soil or self-ore mining machinery. It is made of the work unit, turntable and walking equipment. After the bucket is digging full, it turn to dump, and conduct periodic operations. The single bucker excavator is widely used in housing construction, road construction, hydropower construction, agricultural transformation, military engineering, open pit mining and open storage yard.
   The development of the single bucket excavator tends to large, miniaturization and multi-functional and specialization. Large mining excavator will continue to increase the  bucket capacity to decrease excavation unit.  Combining the construct needing of city and countryside, we should develop the portable microcomputer. In order to solve the special construction, we should develop the special excavator of low pressure, low noise, underwater special, amphibious.
    Shovel excavators are mainly used for digging the material, which is above the surface of machine. Mechanical shovel excavator using push pressure and the lifting force to dredged materials. When digging, keep the boom angle unchanged. Firstly, the bucket down to mining the starting position. Then the overhanging bucket rod will press the bucket tooth into the material pile. At the same time, promote the bucket and cut material. After the bucket is full, the turntable rotary, the bucket was brought to the point of discharge and open the bucket bottom to cut materials. After complish unloading materials, the turntable rotary to the digging position and start next cycle operation.
    Backhoe excavators are mainly used for digging the material, which is under the surface of machine. Mechanical backhoe excavator use the gravity and mining of the equipment to dig materials. The first step is rotating  the bucket rod to make the arm and bucket forward. Secondly, the equipment down the starting position by the gravity and make the bucket teeth cut materials. Then rotate the arm and bucket to cut down the materials. After the bucker is full, lifting the arm to a certain height, the turntable rotary, the bucket was brought to the point of discharge and the rotating bucket start unloading. After complish unloading materials, the turntable rotary to the digging position and start next cycle operation.

Address:Industrial Park, Ju County, Rizhao City, Shandong Province, China . Site Design & SEO by 86001.cn.
Phone:+86-633-6810000 Fax:+86-633-6816518 Email: Hot Product
CopyRight © 2010-2012 Rizhao Shunde Mechanical Parts Company LTD, All Rights Reserved.Sitemap | XML